Clear Ip Ospf - Dell Networking 7048 Reference Manual

no capability opaque
Default Configuration
Opaque Capability is enabled by default.
Command Mode
Router Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#capability opaque

clear ip ospf

Use the clear ip ospf command to reset specific OSPF states. If no
parameters are specified, OSPF is disabled and then re-enabled.
Syntax
clear ip ospf [{configuration | redistribution | counters | neighbor
vlan id
[interface vlan
• configuration — Reset the OSPF configuration to factory defaults.
• redistribution — Flush all self-originated external LSAs. Reapply the
redistribution configuration and re originate prefixes as necessary.
• counters — Reset global and interface statistics.
• neighbor — Drop the adjacency with all OSPF neighbors. On each
neighbor's interface, send a one-way hello. Adjacencies may then be
reestablished.
• interface vlan
interface.
neighbor-id — Drop adjacency with a specific router ID on a specific
•
interface.
neighbor id
[ ]]}]
vlan-id — Drop adjacency with all neighbors on a specific
OSPF Commands
1171