Capability Opaque; Clear Ip Ospf - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
The default reference bandwidth is 10 Mbps
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the interface bandwidth to 500000 Kbps.
console(config-if-vlan1)#bandwidth 500000

capability opaque

Use the capability opaque command to enable Opaque Capability on the router. Use the "no"
form of this command to disable Opaque Capability.
Syntax
capability opaque
no capability opaque
Default Configuration
Opaque Capability is enabled by default.
Command Mode
Router Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#capability opaque

clear ip ospf

Use the clear ip ospf command to reset specific OSPF states. If no parameters are specified,
OSPF is disabled and then re-enabled.
754