Radius Commands; Debug Radius - Dell C9000 Series Reference Manual

Version
7.5.1.0
6.1.1.0
Usage Information To view the defined user names, use the show running-config user command.
Related
Commands

RADIUS Commands

The following RADIUS commands are supported by Dell Networking OS.

debug radius

View RADIUS transactions to assist with troubleshooting.
C9000 Series
Syntax
debug radius
To disable debugging of RADIUS, use the no debug radius command.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Description
Introduced on the C-Series.
Introduced on the E-Series.
• password — specifies a password for users on terminal lines.
• enable sha256-password
• show running-config
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— configures SHA-256 based password.
— views the current configuration.
Security 1951