Enable; Execut - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 13: LPT library function reference

enable

This command provides correlation of real time to measurements of voltage, current, conductance, and

capacitance.

int enable(int instr_id);

Sending enable(TIMERn) initializes and starts the timer and allows other measurements to read

the timer. The time starts at zero (0) at the time of the enable call.

(on page 13-15)

This command causes the system to wait for the preceding test sequence to be executed.

int execut(void);

This command waits for all previous LPT library commands to complete and then sends the devint

(on page 13-13)

The instrument identification code of the timer module (TIMERn)

Model 4200A-SCS Parameter Analyzer Reference Manual

4200A-901-01 Rev. C / February 2017