Keithley 4200A-SCS Reference Manual page 816

Model 4200A-SCS Parameter Analyzer Reference Manual Section 10: KPulse (for Keithley Pulse Cards)
Calculation waveform
An example of a calculation waveform is shown in the next figure. The waveform for this example is
named CALC1, but can be any name that is not already used in the Scratch Pad.
The calculation (add, subtract, multiple or divide) performs the selected math operation on two
selected Scratch Pad waveforms. In the below example, SINE1 is added to Ramp.
After selecting the two waveforms and the math operation, select Preview to display the result of the
calculation. Select OK to place the waveform in the Scratch Pad.
Figure 483: Calculation waveform
Noise waveform
An example of a noise waveform is shown in the next figure. The waveform for this example is named
NOISE1, but can be any name that is not already used in the Scratch Pad.
After changing one or more settings, select Preview to display the waveform. Select OK to place the
waveform in the Scratch Pad.
Figure 484: Noise waveform
4200A-901-01 Rev. C / February 2017 10-17