Model 4200A-SCS Parameter Analyzer Reference Manual
Use KCon to add a prober
On the 4200A-SCS, use KCon to add the prober to the configuration:
1. Open KCon.
2. At the bottom of the Configuration Navigator, select Add External Instrument. The Add External
Instrument dialog box is displayed.
3. Select Probe Station.
4. Select OK. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
5. Select the Micromanipulator 8860 Prober as the model.
4200A-901-01 Rev. C / February 2017
Figure 714: Add a prober in KCon
Figure 715: Use KCon to select a prober
Appendix H: Using a Micromanipulator 8860 Prober
H-21