Keithley 4200A-SCS Reference Manual page 483

Section 6: Clarius
Option
Precision
Show Most Recent
Data
Text
Display Font
Foreground
Background
Transparent
Border
Width
Visible
Add a legend
You can display a legend that describes each series of data.
To add a legend:
1. On the graph, right-click and select Legend. The legend is displayed in the upper right corner of
the graph.
2. Right-click the legend to display the Legend Properties dialog box. An example of a Legend and
the dialog box are shown in the figure below.
3. Change the appearance of the legend as needed. See the table below for descriptions of the
options.
4. Click OK.
5. If needed, drag the legend to a new location on the graph.
6-214
Description
Sets the precision of the displayed values.
Select whether to show the most recent data or run history data.
The heading that is displayed for the data.
The font of the text.
The color of the text.
The background color.
Select to display the box with a transparent background. Clear to make the
background solid.
Note that selecting Transparent sets the background color selection to light gray.
Changes the type of outline around the box. Width must be set to a value other
than 0 in order for the border to be displayed.
The width of the display border (0 to 20).
Select to display the data variables. Clear to hide the data variables. The
settings are maintained when the data variables are hidden.
Figure 371: Graph legend and Legend Properties dialog box
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017