Keithley 4200A-SCS Reference Manual page 795

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 9: Keithley External Control Interface (KXCI)

This command queries input or output parameter values, or both, by number for the last user module run in KXCI.

GP ParameterPosition

GP ParameterPosition NumValues

ParameterPosition

NumValues is only used for an output parameter that is an array. If NumValues is not used, one

value is returned.

Arrays are returned as a list of values separated by semicolons.

The value returned for an input parameter is the given value. The values returned for an output

parameter is the outcome of the test (for example, measured readings).

You can also query a parameter by specifying the name of the parameter in the user module. See

(on page 9-83).

This command queries all test voltages for the Vforce parameter for the user module that was run in the

EX example. Vforce is the fifth parameter in the function.

The following array of test voltages is returned and displayed in the KXCI console:

0; 0.5; 1.0; 1.5; 2.0; 2.5; 3.0; 3.5; 4.0; 4.5; 5.0

Model 4200A-SCS Parameter Analyzer Reference Manual

The position of the parameter in the KULT module

The number of values in an output array to be returned; see Details

4200A-901-01 Rev. C / February 2017