Keithley 4200A-SCS Reference Manual page 1256

Model 4200A-SCS Parameter Analyzer Reference Manual
2. From the ProberBench NT window, select WaferMap file.
3. From the WaferMap window, from the Mark Dies menu, select Mark to Skip.
4. Use Mark to Skip and Mark to Probe to set dies. Click a die in the WaferMap window to either set
or clear the die. The color of the die indicates status (either probe or skip). With Mark to Probe
selected, drag to select multiple dies. With Mark to Skip selected, drag to clear multiple dies.
When done, clear Mark to Skip or Mark to Probe. Otherwise, the Chuck menu remains grayed.
4200A-901-01 Rev. C / February 2017
Appendix G: Using a Cascade Microtech PA200 Prober
Figure 662: ProberBench NT window
Figure 663: Mark Dies menu
G-21