Load, Align, And Contact The Wafer - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Appendix G: Using a Cascade Microtech PA200 Prober

2. From the ProberBench NT window, select the WaferMap file.

3. From the WaferMap window, select and open the appropriate file.

Load, align, and contact the wafer

Using the ProberBench NT computer:

1. From the WaferMap Chuck menu, select Load Position. This brings the chuck to the front of the

Model 4200A-SCS Parameter Analyzer Reference Manual

Figure 649: ProberBench NT window

Figure 650: Chuck menu

4200A-901-01 Rev. C / February 2017