Keithley 4200A-SCS Reference Manual page 1113

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Appendix B: Using a Model 590 C-V Analyzer

Returned values are placed in the Analyze sheet.

-10000 (INVAL_INST_ID): The specified instrument ID does not exist.

-10020 (COMP_FILE_ACCESS_ERR): There was an error accessing the specified cable

compensation file.

-10021 (COMP_FILE_NOT_EXIST): The specified compensation file does not exist.

-10022 (KI590_NOT_IN_KCON): There is no CMTR defined in your system configuration.

-10023 (KI590_MEAS_ERROR): A measurement error occurred.

-10090 (GPIB_ERROR_OCCURRED): A GPIB communications error occurred.

-10091 (GPIB_TIMEOUT): A timeout occurred during communications.

-10101 (ARRAY_SIZE_TOO_SMALL): The specified value for Csize, G_or_Rsize, Vsize, or

Tsize was too small for the number of steps in the sweep.

-10102 (ERROR_PARSING): There was an error parsing the response from the 590.

-10104 (USER_CANCEL): The user canceled the correction procedure.

1. You are prompted to open the circuit so that an offset capacitance measurement can be made.

2. If a cable compensation file is specified, the compensation information in that file for the selected

range and frequency is loaded. If not, instrument default compensation is used.

3. A C-t sweep is performed.

Model 4200A-SCS Parameter Analyzer Reference Manual

4200A-901-01 Rev. C / February 2017