Keithley 4200A-SCS Reference Manual page 456

Model 4200A-SCS Parameter Analyzer Reference Manual
Once you have a link to a cell, you can link to cells that are adjacent below or to the right of the linked
data.
To link to adjacent cells:
1. Select the Calc worksheet cell that contains the linked data and the cells to which you want to link
adjacent cells.
2. Right-click the cell and select Fill Down or Fill Right. The new data is displayed immediately
when you release.
Calc menu option
You can right-click the Calc spreadsheet to access options for working with the spreadsheet.
The options are described below.
Cut: Remove content from a cell into the clipboard.
Copy: Copy content from a cell into the clipboard.
Paste: Paste content from the clipboard into the selected cell.
Insert: Insert cells, rows, or columns into the Calc sheet.
Delete: Remove cells, rows, or columns from the Calc sheet.
Clear: Clear formatting, values, or both from the selected cells.
Format Cells: Allows you format the selected cells, including fonts, number types, alignment,
borders, and patterns.
Fill Down: Use the Fill Down command to fill a selected range of cells with the contents of the top cell
in the column. Select the cells you want to use as the original and the cells below that cell. Right-click
and select Fill Down. The content of the top row of cells is filled into the selected cells.
Fill Right: Use the Fill Right command to fill a selected range of cells with the contents of the left-
most cell in the column. Select the cells you want to use as the original and the cells to the right of
that cell. Right-click and select Fill Right. The content of the left column of cells is filled into the
selected cells.
Hide column: Hide the column from view.
Unhide column: Restore the column that was hidden with Hide.
CVU Data Type (only available for tests that use CVUs): Selects the data type from the CVU:
•
Parallel capacitance and conductance (Cp-Gp)
•
Parallel capacitance and dissipation factor (Cp-D)
•
Series capacitance and resistance (Cs-Rs)
•
Series capacitance and dissipation factor (Cs-D)
•
Resistance and reactance (R-jX)
•
Impedance and phase angle (Z-theta)
Settings worksheet
The Settings worksheet records test configuration information from the Configure pane for the last
execution of a test. The Settings worksheet is read-only, but you can link any of its contents to the
Calc worksheet.
4200A-901-01 Rev. C / February 2017
Section 6: Clarius
6-187