Hp8110Ulib User Library; Ki340Xulib User Library; Ki42Xxulib User Library - Keithley 4200A-SCS Reference Manual

Model 4200A-SCS Parameter Analyzer Reference Manual

HP8110ulib user library

Use the user modules in the HP8110ulib user library to control a Keysight Model 8110A Pulse
Generator. These user modules are summarized in the following table. The table also lists the user
test modules (UTM) created by Keithley Instruments that use the user modules.
HP8110ulib user modules
User Module
PguInit8110
page E-5)
PguSetup8110
page E-6)
PguTrigger8110
page E-8)

ki340xulib user library

Used with the Keithley Instruments Series 3400 pulse/pattern generators.
ki340xulib user modules
User module
PguInit340x
PguSetup340x
PguTrigger340x

KI42xxulib user library

The KI42xxulib user library provides an example subroutine for doing a MOSFET ON resistance
) test routine using the 4200A-SCS LPT library interface.
(R
ON
KI42xxulib user module
User module
Rdson42XX
4200A-901-01 Rev. C / February 2017
UTM Name Description
(on pgu1-init Initializes the pulse generator to the default setup.
(on pgu1-setup Sets the output pulse parameters.
(on pgu-trigger Specifies pulse count and trigger start of output.
Description
Initializes the 3401 or 3402 pulse generator to a specific state.
Defines the pulse timing and voltage settings. Once defined, the pulse
can be triggered using the PguTrigger340x command.
Triggers the pulse (or pulses) defined by the PguSetup340x function.
UTM name Description
rdson Measures the drain to source resistance of a saturated MOSFET.
Section 6: Clarius
6-311