Use Kcon To Add A Prober - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Use KCon to add a prober

On the 4200A-SCS, use KCon to add the prober to the configuration:

1. Open KCon.

2. At the bottom of the Configuration Navigator, select Add External Instrument. The Add External

Instrument dialog box is displayed.

3. Select Probe Station.

4. Select OK. The KCon navigation displays PRBR1 in the Configuration Navigator and the

5. Select the Manual Prober or the Fake Prober as the model.

4200A-901-01 Rev. C / February 2017

Figure 728: Add a prober in KCon

Figure 729: Use KCon to select a prober

Appendix I: Using a manual or fake prober