Kxci Pulse Generator Commands - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

KXCI pulse generator commands

The KXCI commands to control pulse generators are documented in the following topics.

The following documentation includes the corresponding LPT library functions for each KXCI

command string. Refer to

This command sets the output impedance (pulse load).

PD A, BBB.BBBB

Corresponding LPT library function

You can use this command to set the DUT impedance of the load (DUT) independently for each

channel from 1 Ω to 10 MΩ.

This command string sets channel 1 of pulse card 1 for an output impedance of 1 kΩ.

4200A-901-01 Rev. C / February 2017

LPT functions for PGUs and PMUs

Pulse card channel number: 1 to 8; the largest value is the number of channels in

Pulse load, in ohms: 1.0 to 10e6; default 50.0

(on page 13-145)

Section 9: Keithley External Control Interface (KXCI)

(on page 13-91) for details on pulsing