Keithley 4200A-SCS Reference Manual page 1008

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Source, Segment Arb

You can configure each channel to output its own unique Segment Arb waveform. A Segment Arb

waveform is made up of user-defined segments. Each segment can have a unique time interval, start

value, stop value, output trigger level (TTL high or low), and output relay state (open or closed).

measure synchronization

To configure each channel to output a unique Segment Arb

(on page 13-125).

The following arrays are required for the example Segment Arb waveform shown here.

4200A-901-01 Rev. C / February 2017

(on page 5-56) for details on this pulse mode. For triggering, refer to

(on page 5-67).

Figure 514: Segment Arb sequence example

Section 13: LPT library function reference

waveform, refer to

seg_arb_sequence