Keithley 4200A-SCS Reference Manual page 473

Section 6: Clarius
4. Select Properties. The Cursor dialog box for the selected cursor opens, as shown below. The
Sample area displays the cursor that you are configuring, including the color.
5. Select the Attach Method. You can choose:

Free Floating

Closest Point in Any Series: Allows you to attach the selected cursor to any plot on the
graph.

Closest Point in Y1 Series: Only allows you to attach the selected cursor to the specific Y1
axis plot that is selected for Series.

Closest Point in Y2 Series: Only allows you to attach the selected cursor to the specific Y2
axis plot that is selected for Series.
6. If you selected a Closest Point in Series option, select Series and choose the plot to which you
want the attach the cursor.
7. Select the Color for the cursor.
8. If you do not want the cursor to display immediately, clear Visible. You can restore the cursor
later — the cursor keeps its configuration.
9. Click OK. If Visible is selected, the cursors and their related text blocks are displayed on the
graph.
When you first display the cursors, the default location of the cursors is at the origin, and the default
location of the cursor coordinate text block is in the lower right corner of the graph.
Position cursors on the graph
To position cursors:
1. Drag the cursor to its position on the graph.
2. If you selected Closest Point in Any Series and the cursor is not on the correct point, drag the
cursor from the present point to the correct point until it attaches to the point. On the correct point,
drag the cursor to the correct position.
6-204
Model 4200A-SCS Parameter Analyzer Reference Manual
Figure 362: Cursor # dialog box
4200A-901-01 Rev. C / February 2017