Keithley 4200A-SCS Reference Manual page 749

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 9: Keithley External Control Interface (KXCI)

GT 'P Setup1'

This command string gets the program file named Setup1.

SV command: Save file

Channel mapping command

You can use the following command with any system mode page. It maps channel n to a given VS,

SMU, or VM function.

This command maps channel n to a given VS, SMU, or VM function.

If BBB and C are not included in the command, the function defaults to SMU<A>, where <A> is the

number of the channel to be mapped.

This command string maps channel 3 to VM5.

(on page 9-37)

The channel to be mapped: a value between 1 and the number of channels in the

system (9 maximum)

SMU, VS, or VM

The number of the SMU, VS, or VM

Model 4200A-SCS Parameter Analyzer Reference Manual

4200A-901-01 Rev. C / February 2017