Default User Accounts; Create New User Accounts - Keithley 4200A-SCS Reference Manual

Section 11: System administration

Default user accounts

There are two preconfigured Windows
unique user account.
You can use any user account to access all Clarius
software tools.
The kiuser account logon does not require a password.
The kiadmin account logon password is kiadmin1.

Create new user accounts

You can create unique Windows
customize the behavior of a 4200A-SCS without affecting its behavior for other users. It also provides
additional data protection and privacy, because each user can log onto the 4200A-SCS using a
unique logon name and password.
Setting up multiple Windows
should be performed only by a knowledgeable Windows system administrator.
To set up a new user account:
1. Log in as an administrator.
2. In Windows, select Start > Control Panel > User Accounts and Family Safety > User
Accounts.
3. Select Manage another account.
4. Select Create a new account.
5. Select a name and account type as appropriate for your system. The account must be set up as
an administrator.
6. Select Create Account.
7. Log on using the new account and set up the desktop and other elements of the new profile.
8. Select Start> All Programs > Keithley Instruments > Initialize New User to configure Clarius
for the new user.
Initialize New User must be run each time a new user account is created.
11-2
Model 4200A-SCS Parameter Analyzer Reference Manual
®
user accounts on the 4200A-SCS. You can also create a
+
applications and applicable non-Keithley
®
user accounts for each 4200A-SCS user. This enables you to
®
user accounts is an advanced system administration procedure that
4200A-901-01 Rev. C / February 2017
+