Clarius - Keithley 4200A-SCS Reference Manual

Appendix H: Using a Micromanipulator 8860 Prober
3. Select Probe Station.
4. Select OK. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
5. Select the Micromanipulator 8860 Prober as the model.
6. Ensure that the Number of Pins / Positioners is correct. The number of pins defined here
determines the pins that are available to assign to a switch matrix card column.
7. Select Save.

Clarius

Use Clarius to load and run the probesites or probesubsites project using the new KCon
configuration file, which allows you to execute the project for this prober.
On the 4200A-SCS:
1. Open Clarius.
2. Choose Select.
3. Select Projects.
4. Search for probesubsites.
5. Drag the probesubsites project to the project tree.
H-26
Model 4200A-SCS Parameter Analyzer Reference Manual
Figure 723: Use KCon to select a prober
4200A-901-01 Rev. C / February 2017