Smeasf - Keithley 4200A-SCS Reference Manual

Section 13: LPT library function reference

smeasf

This command returns the frequencies used for a sweep.
Usage
int smeasf(int instr_id, double *freq_arr);
instr_id
freq_arr
Details
This command returns the present test frequencies used for a sweep. The frequency values are
returned in an array. The frequency values are posted to Clarius in Analyze after the test has finished.
You can use the smeasfRT command to return sourced sweep frequency values in an array. It posts
the frequency values to Clarius in real time.
Use the measf command to return the frequency used for a single measurement.
Also see
measf (on page 13-177)
smeasfRT (on page 13-185)
13-184
The instrument identification code of the 4210-CVU: CVU1
Returned array of test frequencies
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017