Keithley 4200A-SCS Reference Manual page 1085

Appendix A: Using switch matrices
Add a probe station
Supported probe stations include:
•
Fake Prober
•
Manual Prober
•
Micromanipulator 8860 Prober
•
Karl Suss PA200 Prober
•
Cascade 12000 Prober
•
Signatone CM500 (WL250) Prober
Contact Keithley for the most up-to-date list of supported probers. If you are using an unsupported
prober, you will have to create a user library and module to control it.
To add a probe station to the system configuration:
1. Select Add External Instrument.
2. Select Probe Station.
3. Select OK.
4. In the Configuration Navigator, select the probe station. The Properties are displayed.
A-26
Model 4200A-SCS Parameter Analyzer Reference Manual
Figure 541: Probe station properties
4200A-901-01 Rev. C / February 2017