Keithley 4200A-SCS Reference Manual page 1184

Model 4200A-SCS Parameter Analyzer Reference Manual
The return values from status can be:
•
0: OK.
•
-10000 (INVAL_INST_ID): The specified instrument ID does not exist
•
-10001 (INVAL_PIN_SPEC): An invalid DUT pin number was specified
•
-10003 (NO_SWITCH_MATRIX): No switch matrix was found
•
-10004 (NO_MATRIX_CARDS): No matrix cards were found
•
-10020 (COMP_FILE_ACCESS_ERR): There was an error accessing the specified cable
compensation file
•
-10021 (COMP_FILE_NOT_EXIST): The specified compensation file does not exist
•
-10022 (KI590_NOT_IN_KCON): There is no CMTR defined in your system configuration
•
-10090 (GPIB_ERROR_OCCURRED): A GPIB communications error occurred
•
-10100 (INVAL_PARAM): An invalid input parameter is specified
If CabCompFile does not exist, or if there is no path specified (null string), the default compensation
parameters are used. When entering the path, be sure to use two \ characters to separate each
directory. For example, if your cable file is in:
C:\calfiles\590cal.dat
You would enter:
C:\\calfiles\\590cal.dat
If you are controlling a switch matrix to route signals using a connection UTM (for example,
"connect"), you do not need connect InputPin and OutputPin. Set these parameters to 0.
Also see
None
4200A-901-01 Rev. C / February 2017
Appendix D: Using a Model 82 C-V System
D-43