Model 4200A-SCS Parameter Analyzer Reference Manual
Use KCon to add a prober
On the 4200A-SCS, use KCon to add the prober to the configuration:
1. Open KCon.
2. At the bottom of the Configuration Navigator, select Add External Instrument. The Add External
Instrument dialog box is displayed.
3. Select Probe Station.
4. Select OK. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
4200A-901-01 Rev. C / February 2017
Appendix G: Using a Cascade Microtech PA200 Prober
Figure 670: Add a prober in KCon
Figure 671: Use KCon to select a prober
G-25