Keithley 4200A-SCS Reference Manual page 706

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

5. Between the Place user library module call below and Place user library

module call above comments, call your user module as it is described in

<debugtaskname>.c. For the VSweep user module, you could enter the following code:

Double Imeas;

Double Vforce;

VSweep(0, 5, Imeas, 11, Vforce, 11)

You can also define a UTM in Clarius with your user module, as shown in

module that returns data arrays

This generates the file <UTMname>.ktm at C:\s4200\Projects\<projectname>\tests, which

includes the necessary call to your user module. Open <UTMname>.ktm with a text editor, copy the

contents, and paste them into <debugtaskname>.c. Using this method ensures that the input

parameters for your user module fit the restrictions set by KULT.

6. In the Build menu, select Compile to compile the <debugtaskname>.c program.

Loading a debug task

To load a saved debug task, use the load_dt command-line utility.

c:\>load_dt <debugtaskname>

For example, to load the debug task called VSweepDebug, enter the following at the command line

c:\>load_dt VSweepDebug

4200A-901-01 Rev. C / February 2017

(on page 8-28),

Figure 457: Example code generated by the create_dt utility

Section 8: Keithley User Library Tool (KULT)

Checking the VSweep user module

Tutorial 2: Creating a user

(on page 8-32).