Keithley 4200A-SCS Reference Manual page 1160

Model 4200A-SCS Parameter Analyzer Reference Manual
CtSweep test description
As shown in
make C-t measurements. Refer to
parameters.
If using the parameters shown in
measurements using a 100 ms sample time between reading samples. The time interval between
reading samples is determined by the set sample time and the selected reading rate.
The graph below shows for this test plots capacitance versus time.
4200A-901-01 Rev. C / February 2017
C-t sweep (on page D-18), the CtSweep UTM uses the CTsweep82 user module to
CtSweep82 user module
C-t sweep
Figure 597: C-t measurements
Figure 598: CtSweep graph
Appendix D: Using a Model 82 C-V System
(on page D-33) for definitions of the input
(on page D-18), the 590 performs 100 capacitance
D-19