Appendix H: Using a Micromanipulator 8860 Prober
5. Double-click the pcBridge icon on the desktop to open the main pcBridge window.
6. Select the Setup menu. The pcBridge Communications Setup window is displayed.
7. Use the pcBridge Communications Setup to configure the communications settings. These
settings should be 8 data, 1 stop, no parity, xon/xoff.
•
Interface Type: RS232
•
Baud: 9600
•
Port: COM2
•
Term: cr and lf (termination character of carriage-return and line-feed)
8. Click OK.
9. Click the pcLaunch icon to open the main pcLaunch window.
H-4
Figure 675: pcBridge icon
Figure 676: Prober setup: Main pcBridge window
Figure 677: pcBridge window
Figure 678: pcLaunch icon
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017