Load, Align, And Contact The Wafer - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Appendix J: Using a Cascade Summit-12000 Prober

Load, align, and contact the wafer

Using Nucleus UI on the probe station computer:

1. From the Nucleus toolbar, select Window > Motion Control. The Motion Control window opens.

See the following two figures.

Figure 761: Nucleus toolbar

Figure 762: Motion Control window

2. From the Motion Control window, click the Chuck to front button.

Figure 763: Chuck to front button

3. From the Nucleus toolbar, click the Enable Joystick button.

Figure 764: Enable Joystick button

4200A-901-01 Rev. C / February 2017