Keithley 4200A-SCS Reference Manual page 692

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Section 8: Keithley User Library Tool (KULT)

Change the module description

In Clarius, any user test modules (UTMs) that are connected to this user module show the text that is

entered on the Description tab in KULT.

To change the module description:

1. Select the Description tab.

2. Above DESCRIPTION, change MODULE: Rdson42xx to MODULE: RdsonAvg, as shown in the

following figure.

3. Replace all occurrences of Rdson with RdsonAvg.

Figure 453: User module description

Save, compile, and build the modified library

You must save and compile the user module. You must also rebuild the library to ensure that the new

module is available for use by Clarius user test modules (UTMs).

To save, compile, and build the user module and library:

1. Select File > Save Module.

2. Select Options > Compile. A dialog box is displayed that indicates the compile is in process.

3. Select Options > Build Library. A dialog box is displayed that indicates the build is in process.

4200A-901-01 Rev. C / February 2017