Keithley 4200A-SCS Reference Manual page 1283

Appendix H: Using a Micromanipulator 8860 Prober
3. Select the spline pattern. The icon of the active spline pattern is transferred to the Edit Die
Program Parameters dialog box, as shown in the following figure.
4. Click Save on the Die Program Tools window.
5. To open an existing program listing file, click the pcWfr Open button on the Die Program Tools
window. Select the file and click OK.
Before starting testing, physically align the pins over the reference die.
H-20
Figure 713: Edit Die Program Parameters window
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017