Tools; Formulator Constants - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 7: Keithley Configuration Utility (KCon)

The following table summarizes some differences and similarities between the two modes.

Command set comparison

Characteristic

String reported in response to ID query

GPIB data resolution

Maximum number of sweep data points

Possible instrument configurations

Configuration query

Instrument self test

Custom A/D control

200 V, 1 A capability

1.0 pA source/measure-range capability

(with preamplifer on SMU)

KXCI always starts in the selected mode.

For additional details about the differences between the 4200A extended mode and 4145 emulation

mode, refer to

Tools

The options in the Tools dialog box allows you to change Formulator constants, generate technical

support files, and get KCon version and copyright information.

The Formulator Constants option allows you to access the default Formulator constants that are

automatically assigned to new Clarius test modules when they are created. You can edit the default

Formulator constants.

Keithley External Control Interface (KXCI)

Figure 418: Default Formulator constants

Model 4200A-SCS Parameter Analyzer Reference Manual

4145 Emulation

ID HP4145B 1.1,1.0

Not supported

(on page 9-1).

4200A (Normal)

KI4200A Vx.x.x (where x.x.x is the

version number)

*OPT? command

IT4 command options

4200A-901-01 Rev. C / February 2017