Disable - Keithley 4200A-SCS Reference Manual

Model 4200A-SCS Parameter Analyzer Reference Manual
The 4225-PMU or 4220-PGU returns to the following states:
•
The pulse mode is maintained. For example, if the pulse card is in Segment Arb mode, it will still
be in Segment Arb mode after the devint process is complete.
•
5 V and 10 mA ranges
•
If in pulse mode:
Period of 1 µs

Transition Times (Rise and Fall) of 100 ns

Width of 500 ns


Voltage high and low of 0 V
Load of 50 Ω

•
If in segmented arb mode, Start Voltage is 0 V
•
If in arbitrary waveform mode, Table Length is 100
Also see
clrcon (on page 13-199)
clrscn (on page 13-9)
clrtrg (on page 13-11)
dev_abort
devclr (on page 13-67)
kibdefint (on page 13-24)

disable

This command stops the timer and sets the time value to zero (0).
Usage
int disable(int instr_id);
instr_id
Details
Timer reading is also stopped.
Sending disable(TIMERn) stops the timer and resets the time value to zero (0).
Also see
enable (on page 13-16)
4200A-901-01 Rev. C / February 2017
(on page 13-92)
The instrument identification code of the timer module (TIMERn)
Section 13: LPT library function reference
13-15