Keithley 4200A-SCS Reference Manual page 955

Section 13: LPT library function reference
The figure below shows example a waveform measurement with pre-data and post-data. Pre-data is
extra data taken before the rise time of the pulse; post-data is extra data taken after the fall time.
Use the pulse_sample_rate command to set the sampling rate for pulse measurements.
Before calling the pulse_meas_timing command, use the pulse_meas_sm or pulse_meas_wfm
command to configure the measurement type.
Also see
Measurement timing
Measurement types
pulse_meas_sm
pulse_sample_rate
pulse_meas_wfm
13-110
Figure 505: Waveform measurements with pre-data and post-data
(on page 5-74)
(on page 5-70)
(on page 13-108)
(on page 13-116)
(on page 13-111)
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017