Set Up Programmed Sites Without A Subsite - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Appendix K: Using a Signatone CM500 Prober

3. Move the Z Chuck up to confirm contact condition using the Contact icon on the toolbar.

Figure 807: CM500 Prober Z Chuck Up (CONTACT) icon

4. If the edge sense is plugged in for contact input, turn ON SoftZ. A red LED will appear in the

motion control panel.

Figure 808: CM500 Prober Motion Control Panel

5. Move the Z Chuck down using the Separate icon on the toolbar.

Figure 809: CM500 Prober Z Chuck Down (SEPARATE) icon

Set up programmed sites without a subsite

1. Click the Program Site icon on the toolbar.

Figure 810: CM500 Prober Edit Program Sites icon

2. Select the Enter Site Map function.

Figure 811: CM500 Prober Edit Program Site window

4200A-901-01 Rev. C / February 2017