Keithley 4200A-SCS Reference Manual page 1118

Model 4200A-SCS Parameter Analyzer Reference Manual
If the file defined for CabCompFile does not exist, or there is no path specified (null string), the
default compensation parameters are used. When entering the path, use two backslash (\\)
characters to separate each directory. For example, if your cable file is in
C:\calfiles\590cal.dat, you enter the following:
C:\\calfiles\\590cal.dat
If a switch matrix to route signals is being controlled by a connection action (for example, connect),
there is no need to connect InputPin and OutPin. Set these parameters to 0.
The value of ((LastBias − FirstBias) / StepV) +1 must be less than or equal to the Csize,
Vsize, G_or_Rsize, and Tsize parameters.
For Range, the measurement range values are shown in the following table.
Range
1
2
3
4
The reading rates and resolutions for the ReadingRate parameter are described in the following
table.
Reading rate
0
1
2
3
4
Returned values are placed in the Analyze sheet.
•
0: OK.
•
-10000 (INVAL_INST_ID): The specified instrument ID does not exist.
•
-10020 (COMP_FILE_ACCESS_ERR): There was an error accessing the specified cable
compensation file.
•
-10021 (COMP_FILE_NOT_EXIST): The specified compensation file does not exist.
•
-10022 (KI590_NOT_IN_KCON): There is no CMTR defined in your system configuration.
•
-10023 (KI590_MEAS_ERROR): A measurement error occurred.
•
-10090 (GPIB_ERROR_OCCURRED): A GPIB communications error occurred.
•
-10091 (GPIB_TIMEOUT): A timeout occurred during communications.
•
-10101 (ARRAY_SIZE_TOO_SMALL): The specified value for Csize, G_or_Rsize, Vsize, or
Tsize was too small for the number of steps in the sweep.
•
-10102 (ERROR_PARSING): There was an error parsing the response from the 590.
•
-10104 (USER_CANCEL): The user canceled the correction procedure.
4200A-901-01 Rev. C / February 2017
100 kHz
2 pF / 2 μs
20 pF / 20 μs
200 pF / 200 μs
2 nF / 2 ms
Nominal reading rate
(per second)
1000
75
18
10
1
Appendix B: Using a Model 590 C-V Analyzer
1 MHz
20 pF / 200 μs
20 pF / 200 μs
200 pF / 2 ms
2 nF / 20 ms
Display readings Resolution
(digits)
C 3.5
C,G,V 3.5
C,G,V 4.5
C,G,V 4.5
C,G,V 4.5
B-25