Keithley 4200A-SCS Reference Manual page 398

Model 4200A-SCS Parameter Analyzer Reference Manual
SegARBConfig control parameters
The following tables summarize all the parameters in the SegARBConfig control. In the tables, each
parameter is shown mapped to its parameter target. As mentioned above, the Segment Arb
functionality is primarily in two LPT commands: seg_arb_sequence and seg_arb_waveform. In
addition, a few parameters are unique to the SegARBConfig control.
SegARBConfig parameter names mapped to LPT function seg_arb_sequence
In this table, the variable name is in the function
Parameter
name
SegTime
SegStartV
SegStopV
SegSSR
SegTrig
SegMeasType
SegMeasStart MeasStart
SegMeasStop
NumSegments
1
If using a single value instead of an array, the SegARBConfig control automatically assigns the value to each
segment.
SegARBConfig parameter names mapped to SegARBConfig
In this table, the variable name is in the function SegARBConfig.
Parameter
name
SegMeas
SeqList
SeqStartSeg
SeqStopSeg
1
SegMeas parameter turns a measurement on or off for each segment and is independent of the SegMeasType
(based on implementation in user module).
4200A-901-01 Rev. C / February 2017
Variable name in
function Type
Time Double array
Double array
StartV
Double array
StopV
SSR Integer array
Integer array
Trig
MeasType Integer array or
1
Integer
Double array or
1
Double
MeasStop Double array or
1
Double
NumSegments Integer
Variable name in
function Type
Integer array
SegMeas
SeqList Integer array
SeqStartSeg Integer array
SeqStopSeg Integer array
seg_arb_sequence (on page 13-125).
Required in
SegARBConfig?
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Required in
SegARBConfig?
No
No
No
No
Section 6: Clarius
Description
Time duration for each
segment
Segment start voltage
Segment stop voltage
Solid State Relay control, per
segment
Trigger output state for each
segment
Measurement Type: None,
spot mean, or waveform
Start point for measurement
window, for each segment;
from 0 to 1 (100%)
Stop point for measurement
window, per segment; from 0
to 1 (100%)
Number of segments in a
sequence
Description
1
Measurement Enabled
List of defined sequences in
SegARBConfig
Start segment array value in
SegARBConfig
Stop segment array value in
SegARBConfig
6-129