Keithley 4200A-SCS Reference Manual page 733

Section 9: Keithley External Control Interface (KXCI)
ST
This command controls auto standby.
Usage
ST A, B
A
B
Details
For a SMU, the ST command controls auto standby. When auto standby is enabled, the SMU
automatically goes into standby when the test completes. When disabled, the output stays on when
the test completes.
Also see
None
9-22
SMU channel number (1 to 9)
Enable or disable auto standby:
•
0: Disable auto standby
•
1: Enable auto standby
Model 4200A-SCS Parameter Analyzer Reference Manual
4200A-901-01 Rev. C / February 2017