Keithley 4200A-SCS Reference Manual page 833

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 12: Maintenance

5. Select SMU Auto Calibration. A warning dialog box is displayed.

6. Select OK. The SMU Auto Calibration dialog box opens, as shown in the following figure.

7. Select Start. A progress bar is displayed.

When auto calibration is complete, the message "Auto calibration successfully completed" is

8. Select Close. Auto calibration is complete.

Model 4200A-SCS Parameter Analyzer Reference Manual

Figure 491: SMU Auto Calibration dialog box

4200A-901-01 Rev. C / February 2017