Keithley 4200A-SCS Reference Manual page 466

Model 4200A-SCS Parameter Analyzer Reference Manual Section 6: Clarius
Open a graph
To open a graph:
1. In the project tree, select a test.
2. Select Analyze. The graph is displayed at the bottom of the center pane. The time and date when
the data was generated are displayed in the upper left corner.
3. To enlarge the graph, select the Graph view option.
Figure 357: n-MOSFET drain family of curves graph example
Define data to be graphed
The Graph Definition dialog box displays the data series that you can show on the graph. The names
of the data series are from the first row of the Run spreadsheet. If there are multiple parameters with
the same name, an * is displayed after the parameter name in the Graph Definition dialog box.
The Sheet column shows you whether the data came from the Run tab or the Calc tab.
Column shows you the column where the data in the sheet the data came from.
You can use Axis Properties to change the axis. See Define the axis properties (on page 6-200) for
information.
4200A-901-01 Rev. C / February 2017 6-197