Keithley 4200A-SCS Reference Manual page 774

Model 4200A-SCS Parameter Analyzer Reference Manual
PV
This command sets pulse high, pulse low, range, and current limit independently for each channel of the selected
pulse card.
Usage
PV A, BBB.BBBB, CCC.CCCC, DDD.DDDD, EEE.EEEE
A
BBB.BBBB
CCC.CCCC
DDD.DDDD
EEE.EEEE
Corresponding LPT library functions
pulse_vhigh
pulse_vlow
pulse_range
pulse_current_limit
Example
PV 1, 2, -2, 5, 200e-3
For pulse card 1 channel 1, this command string sets pulse high to +2 V, pulse low to -2 V, pulse range to
5 V and current limit to 200 mA.
Also see
None
4200A-901-01 Rev. C / February 2017
Pulse card channel: 1 to 8; the largest value is the number of channels in the
system
Pulse high in volts:
•
5 V range (high speed): -5.0 to +5.0
•
20 V range (high voltage): -20.0 to +20.0
•
Default: 0.0
Pulse low in volts
•
5 V range (high speed): -5.0 to +5.0
•
20 V range (high voltage): -20.0 to +20.0
•
Default: 0.0
Pulse range in volts
•
5 V range: 5
•
20 V range: 20
•
Default: 5
Current limit in amps (range and load dependent)
•
5 V range (high speed): -0.2 to +0.2
•
20 V range (high voltage): -0.8 to +0.8
•
Default: 0.105 (5 V range)
(on page 13-157)
(on page 13-159)
(on page 13-149)
(on page 13-139)
Section 9: Keithley External Control Interface (KXCI)
9-63