Keithley 4200A-SCS Reference Manual page 794

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

This command queries input or output parameter values, or both, by name for the last user module run in KXCI.

GN ParameterName

GN ParameterName NumValues

ParameterName

NumValues is only used for an output parameter that is an array. If NumValues is not used, one

value is returned.

Arrays are returned as a list of values separated by semicolons.

The value returned for an input parameter is the given value. The values returned for an output

parameter is the outcome of the test (for example, measured readings).

You can also query a parameter by specifying the corresponding number for the parameter in the

KULT module (see

GN Vforce 11

This command queries all 11 test voltages (Vforce parameter) for the function that was run in the

page 9-82) example.

The following array of test voltages are returned and displayed in the KXCI console:

0; 0.5; 1.0; 1.5; 2.0; 2.5; 3.0; 3.5; 4.0; 4.5; 5.0

4200A-901-01 Rev. C / February 2017

The name of the parameter in the KULT module

The number of values in an output array to be returned; see Details

GP: get parameter (by number)

Section 9: Keithley External Control Interface (KXCI)

(on page 9-84)).