My Settings - Keithley 4200A-SCS Reference Manual

Model 4200A-SCS Parameter Analyzer Reference Manual
Options in the Information Editor
Preview
Name
Title
Description
Author
Help
Include Help
Library Image
Icon Image

My Settings

The options in My Settings allow you to set environment settings, run settings, graph defaults, and
GPIB abort preferences. You can also view revision and copyright information regarding Clarius.
Specify environment settings
The options in Environment Settings allow you to determine if GPIB devices are reset on startup, if
unsettled measurements for PMUs are allowed, if you can edit the user interface for user test
modules (UTMs), if site tracking is available for stress testing, and where your projects are stored.
Reset GPIB devices when Clarius starts
Determines if the GPIB devices in the system are reset to their default settings when Clarius starts
up.
4200A-901-01 Rev. C / February 2017
Displays the changes you make as they will appear in the library.
Type the new name. This is the name that is used in the library and the project tree.
Type the title. This is used in the library.
Type a brief description of the item. This is displayed in the library.
Type information that identifies who created this item. This is available only through the
Library Information Editor.
Only editable when adding an object from the project tree to the library. This is the help
file that is displayed in the right pane when Configure or Analyze is selected. It is also
displayed when the item is selected in the library.
Only displayed when you add an item from the project tree to the library. Determines if
the existing help is included with the new item. If you want to include the help that was
associated with the original object, select Include Help. Clear Include Help to keep the
help from displaying (the Help pane will be blank). You cannot change the help link; you
can only include or hide it.
The image that is displayed in the library. Click the image to select a different image.
Images should be 400x400 pixels in png format. Larger images display, but anything
larger than 400x400 is cut off in the library display.
To re-use an image from an older project, you may need to save the existing bmp image
to png format. You can use a tool such as Microsoft
To leave the image area blank, select Clear.
Devices only. The image that is displayed in the project tree. Click the image to select a
different image. Images should be 80x80 pixels in png format. Larger images will
display, but anything larger than 80x80 will be cut off in the project tree.
To re-use an image from an older project, you may need to save the existing bmp image
to png format. You can use a tool such as Microsoft
To leave the image area blank, select Clear.
Section 6: Clarius
®
Paint to convert the image.
®
Paint to convert the image.
6-301