Gpib Status Indicators (Gpib Communications Only); Graph Display; Using Kxci; Logging Commands, Errors, And Test Results - Keithley 4200A-SCS Reference Manual

Section 9: Keithley External Control Interface (KXCI)

GPIB status indicators (GPIB communications only)

After KXCI is started, indicators in the GPIB Status box report interface status. A green indicator
signals the present status:
•
SRQ: Turns on when an error or operating condition occurs.
•
LTN: When on, instrument is in the listener active state.
•
TLK: When on, instrument is in the talker active state.
•
RMT: When on, instrument is in the remote state.

Graph display

In response to optional graphics commands, the right side of the KXCI user interface displays a graph
of the test results. To hide the graph, select the Hide Graph button, which provides a larger display
area for commands, error messages, and test results.

Using KXCI

To start GPIB operation, start KXCI. The 4200A-SCS is ready to accept GPIB commands immediately
after you start KXCI.
For command information, refer to
page 9-13), Ethernet command reference
9-59).

Logging commands, errors, and test results

When you send GPIB commands, KXCI logs the commands, error messages, and test results as
described in the following topics.
To stop GPIB operation, close KXCI by selecting Exit.
9-6
Model 4200A-SCS Parameter Analyzer Reference Manual
GPIB command set (on page 9-10),
(on page 9-49), and
GPIB command reference
Pulse generator commands
4200A-901-01 Rev. C / February 2017
(on
(on page