Keithley 4200A-SCS Reference Manual page 786

Model 4200A-SCS Parameter Analyzer Reference Manual
:CVU:DCV
This command sets the DC bias voltage for specified CVU card.
Usage
:CVU:DCV dclevel
dclevel
Details
In user mode, this takes immediate effect.
In system mode, the value is buffered for use in Frequency and AC Voltage sweeps and DC
Bias/Sample.
Also see
None
:CVU:ACZ:RANGE
This command sets the AC measurement range for the specified CVU card.
Usage
:CVU:ACZ:RANGE range
range
Also see
None
:CVU:FREQ
This command sets the frequency for the AC source for the specified CVU card.
Usage
:CVU:FREQ freq
freq
Details
In user mode, this takes effect immediately.
In system mode, the value is buffered for use in Voltage Bias/Sample tests, List and linear Voltage
sweeps, and AC Voltage sweeps.
Also see
None
4200A-901-01 Rev. C / February 2017
-30 V to +30 V
Range:
•
0: Auto
•
1e-6: 1 µA
•
30e-6: 30 µA
•
1e-3: 1 mA
10 mV to 100 mV; values that fall between supported frequencies are coerced to
closest supported frequency
Section 9: Keithley External Control Interface (KXCI)
9-75