Keithley 4200A-SCS Reference Manual page 1100

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Place capacitance source values in a spreadsheet (display-cap-file)

To place the source values in the Analyze sheet:

1. Select display-cap-file. The default parameters are displayed, as shown in the following figure.

2. Ensure that the CabCompFile field has the same file directory path that is used in save-cap-

3. Set the array size in the RangeSize, Values100kSize, and Values1MSize fields.

4. Click Run. The calibration source values are placed into the Analyze sheet for this action.

5. Select Analyze to view the spreadsheet for display-cap-file. An example spreadsheet is

shown in the following figure.

4200A-901-01 Rev. C / February 2017

Figure 553: DisplayCableCompCaps590 default parameters

(Enter and save capacitance source values (save-cap-file)

Figure 554: Display-cap-file spreadsheet showing capacitor source values

Appendix B: Using a Model 590 C-V Analyzer

(on page B-6)).