Keithley 4200A-SCS Reference Manual page 780

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

:CVU:DELAY:SWEEP

This command sets the sweep delay for the CVU test on the selected card.

:CVU:DELAY:SWEEP sweepd

This command is used when in sweeping mode (which is all sweep types except

:CVU:BIAS:DCV:SAMPLE).

:CVU:SAMPLE:HOLDT

This command sets the hold time for a sampling mode test on the selected card.

:CVU:SAMPLE:HOLDT holdt

This is only used when executing the :CVU:BIAS:DCV:SAMPLE command.

:CVU:BIAS:DCV:SAMPLE

:CVU:SAMPLE:INTERVAL

This command sets the delay between samples for the selected card.

:CVU:SAMPLE:INTERVAL interval

This is only used when executing the :CVU:BIAS:DCV:SAMPLE command.

:CVU:BIAS:DCV:SAMPLE

4200A-901-01 Rev. C / February 2017

Delay (0 to 999 s)

Hold time (0 to 999 s)

(on page 9-67)

Delay (0 to 999 s)

(on page 9-67)

Section 9: Keithley External Control Interface (KXCI)