Appendix G: Using a Cascade Microtech PA200 Prober
9. From the Interface Configuration dialog box, change Response Terminator to CR.
10. GPIB only: Ensure that the GPIB address matches the address in the configuration file.
11. Click OK.
Leave the Suss RS232 on COMM2 dialog box open. This ensures its services are available for the
WaferMap program.
Set up wafer geometry
On the ProberBench NT computer:
1. Select the ProberBench NT icon (shortcut) on the desktop.
G-10
Model 4200A-SCS Parameter Analyzer Reference Manual
Figure 640: Interface Configuration dialog box
Figure 641: ProberBench NT icon
4200A-901-01 Rev. C / February 2017