Create A Site Definition And Define A Probe List - Keithley 4200A-SCS Reference Manual

Model 4200A-SCS Parameter Analyzer Reference Manual
Refer to Clarius probesites and probesubsites examples for specifics on selecting sites to
probe.
10. Select File > Project > Save to save the WaferMap settings.

Create a site definition and define a probe list

Creating a site definition for single subsites for each die involves using the software to create a
selection of dies to probe. If a single subsite per die is to be probed, refer to
project example
using the software to create a selection of dies to probe, but also includes creating a selection of the
subsites on each die that will be probed. If multiple subsites for each die will be probed, refer to
Probesubsites Clarius project example
To load a previously defined and saved site definition and a probe list:
1. Select the ProberBench NT icon on the desktop.
4200A-901-01 Rev. C / February 2017
Figure 647: pa200 WaferMap: Save
(on page H-17). Creating a site definition for multiple subsites for each die involves
(on page J-21).
Figure 648: ProberBench NT icon
Appendix G: Using a Cascade Microtech PA200 Prober
Probesites Clarius
G-13