Hivcvulib User Library; Hotchuck_Temptronics3010B User Library; Hotchuck_Triotek User Library; Hp4284Ulib User Library - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

hivcvulib user library

The hivcvulib user library contains user modules for controlling high-voltage C-V measurements.

You can use these modules with either one or two 4205-RBT configurations. The next table lists and

briefly describes the user modules.

hivcvulib user modules

This user library controls the temperature of Temptronics 3010B hotchucks. The user module in this

library sets the target temperature and waits until the target is reached before exiting.

Hotchuck_Temptronics3010B user module

The user module in the Hotchuck_Triotek user library is used to control the temperature of the

Trio-Tech hot chuck.

Hotchuck_Triotek user module

SetChuckTemp

You use the user modules in the HP4284ulib user library to control the Keysight 4284A or 4980A

LCR Meter. These user modules are summarized in the following table.

HP4284ulib user library

4200A-901-01 Rev. C / February 2017

Provides capacitance measurements as a function of time at a user-

specified DC bias. You can measure capacitance up to 200 V DC bias

with one 4205-RBT and one SMU. Additionally, you can measure

capacitance up to 400 V DC bias with two 4205-RBTs and two SMUs.

Uses one 4205-RBT to sweep a DC voltage across the DUT using the

4200-SMU or 4210-SMU and measure the capacitance using the

4210-CVU. If two 4205-RBTs are used with the SweepV module, one

SMU sweeps the DC voltage and the other SMU applies an offset DC

This routine controls the Temptronics thermal controller 3010B and other

compatible models.

Sets the temperature of the Trio-Tech hot chuck.

Makes a single capacitance measurement.

Makes capacitance versus voltage measurements using a staircase sweep.

Section 6: Clarius