Step 3. Add Switching System Mainframe - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

5. From the Model list, select the prober.

6. Enter the Number of Pins / Positioners.

7. Select the options that are appropriate for your prober.

The number of pins defined in the probe station properties determines the pins that are available to

assign to a switch matrix card column. Make sure the number of pins assigned is appropriate for

your system.

Step 3. Add switching system mainframe

To add a switching system mainframe:

1. Select Add External Instrument.

2. Select the Keithley 707/707A/707B Switching Matrix or Keithley 708/708A/708B Switching

3. Select OK.

4. In the Configuration Navigator, select the switching matrix. The properties are displayed. The

following figure shows the properties for the 707/707A/707B. If the 708/708A/708B mainframe is

selected, there is only one switch card slot.

4200A-901-01 Rev. C / February 2017

Figure 542: KCon MTRX1 Properties tab

Appendix A: Using switch matrices